how to shine boots

How to Shine Boots

Whether you're a soldier, or just getting ready for a classy event, knowing how to shine your boots is a talent you need to master. Why? Polished boots are a rigid requirement in the military and for good reason.

Shiny boots say a lot about a man's image. Not only do they look good, but they can also be beneficial for your career. Plus, shining your boots can prolong their life and extend their usability. Here are the ways on how to shine boots.

1. Preparation

Prepare your boots, your workspace, and of course the materials you'll be needing. These are:

  • Shoe polish
  • Cotton rags
  • Water or alcohol
  • Horsehair brush (optional)
  • Shoe tree (optional)

Boot shining is a messy task; you never know if your wax or shoe polish will spill on your floor. If you value your floor, make room to shine your boots where any unexpected accidents can happen without much damage to your home.

shine boots materials

Prepare your boots by cleaning them thoroughly. Remove excess dirt or dust by brushing them with a horsehair brush or any brush available to you as long as the bristles are soft. If you don't have horsehair brush, you can use cotton cloths as well.

You may want to use a damp cloth after you have removed the initial layer of dirt. Just make sure that the boots are dry before proceeding to the next step.

2. Apply the Polish

Wrap your index and middle finger with a soft piece of cotton cloth, making sure that there are no wrinkles. Dip your cloth-covered fingers on the shoe polish and with small, circular movements, gently rub the surface of the boots until you see a faint shine.

Once you've covered all the areas, let them dry for about 5-10 minutes.

3. Shine

Take off the cloth from your fingers and replace it with a new one. Dip your fingers lightly into the water and gently rub them against the boots. Keep doing this until you see a greater shine come through. Let the water dry.

shine boots

With the same cloth on your fingers, apply shoe polish and gently rub them on the boots with small circular movements. Do this until you see the swirls disappear and a new shine come through. Apply water again, then wait for it to dry.

Repeat this process until you get the shine that you're looking for. It may take up to 5 repetitions, but for new boots, you need up to 8.

3. Buff

When you're satisfied with the shine of your boots, give them a final buff. Use a horsehair brush or any soft-bristled brush to do this. An old pair of nylon stocking will do the job well if you don't have a brush around.

Some people use rubbing alcohol instead of water, so you may need to experiment and create your own routine. There are no fast rules in shining boots and no single way how it can be done. Remember, boots need to be shined regularly to keep them looking good and last a long time.

leather boots

No one would ever admit to not desiring that their boots stay shiny. That shine says that either the boots are new, clean, or expensive. Now, with this process, you can have shiny boots whenever you without paying anyone else to do it for you. Follow these steps on how to shine boots now and remember to avoid getting blinded by the shine.

how to weather proof leather boots

How to Waterproof Leather Boots?

Nothing is more frustrating than donning a new pair of leather booties only to be ruined by some predatory puddle or rain. Let us admit it, leather shoes are expensive, much more when they need to be retired earlier. However, if you take good care of them, they last for many years. Waterproofing your leather shoes is the answer to its longevity. Check out below the six easy steps you need to take to waterproof your leather boots.

1. Thoroughly clean your boots. Set aside the laces in a safe place. Knock them off firmly against each other to get rid of any loose soil or mud. Use a stiff brush to make sure that there are no particles or dust left on the shoe surface. It is best to do this outside, so dirt and small stones will not pile inside your house.

leather boots

You can simply wipe the shoes using a clean cloth for new pairs. Meanwhile, for boots that have previously gone waterproofing or conditioning, ensure that the previous conditioning layer has been removed to avoid buildup.

2. In case you plan to use a seam-seal, apply it before you start the waterproofing treatment. Seam sealing is coating the seams of the shoes using a specialized adhesive. This protects the holes and the threads used in the stitching process. Here is a tip: using a syringe is the best way to apply a neat and consistent bead of sealer.

3. Apply a small amount of dubbin wax to a cloth and then run this over the leather boots thinly. Work the cloth in a circular motion and fully rub the wax into one section before moving to the next area. You can use a hair dryer to soften the wax. Repeat this step as necessary. Waxes suit boots that have a smooth leather finish. On the other hand, oil treatment is preferred on new leather boots. It will soften the leather, which is a good thing if you still need to break in your boots.

leather boots

Consider using silicone spray treatments if you do not have the luxury of time. Waterproof sprays work for both leather and synthetic boots. All you need to do is spray it directly onto the leather boots. Read the direction of the product you are using and check if rubbing is needed or not. Waterproof sprays do not soak into leather and are not as long lasting as oil and wax. You will need to re-apply it from time to time.

4. Let your leather boots dry naturally between 30 and 60 minutes, although overnight treatment is highly recommended. Do not attempt to apply direct heat to the boots like a blow dryer. This will only cause cracks and discoloration. You can use a fan blowing room temperature air instead to speed the drying process. See to it that the tongue is propped open.

5. Wipe off excess moisture, wax, and oil using a dry cloth.

6. Expose the newly treated boots under the sun to let the treatment absorb fully. Check that the boots do not feel sticky. If so, this means that the conditioner has not completely cured and this will only attract dirt and moisture.

waterproof leather boots

Voila! You can now confidently brace the winter or rain now that your leather boots are safely and securely waterproofed. By the way, make sure you test out your method first on a small area of your shoe surface before full application. While not always the case, some products tend to change the appearance and color of the shoes. Also, repeat this procedure every few months, depending on how often you wear your leather booties. We’re hopeful that this guide on how to waterproof leather boots will be of great help to you!